PID Test System (Single Power Solution)
Meet the PID test requirement specified in the IEC62804 standard.
l The frame the module is grounded, which not only simulates the actual situation, but also prevents the potential danger caused by the high voltage of the frame during the test.
l For each module, use the 4-wire test method, 2 high-voltage cables, and 2 ground cables. The high-voltage cables are connected to the inside of the module through the terminal box. The ground wire is connected to the frame or connected to other effective positions.
l Multiple currents are displayed simultaneously;
l Conversion of positive power supply and negative power supply, which is simulation of positive ground or negative ground.
l Can set the test time, with automatically stop;
l The screen displays the test conditions and records the test data.
l Communication with the IPC
Alarm setting range
|1～1000 uA /-1000 uA～1|
Temperature control stability
Meet the heating rate of 5°C/min.
Humidity control range
Humidity control stability